13 Maret 2009

Tes Posting Audio

Tes kirim audio dari Samsung SGH-i550W

Tes Posting Video

Direkam & dikirim via Samsung SGH-i550W

Tes Posting via HP

Tes kirim foto dari Samsung SGH-i550W

JAR dan JAD

File yang berekstensi .jar adalah file yang sebenarnya, sedangkan .jad hanya merupakan sebuah file deskripsi yang menjelaskan secara sistem dari file .jar yang disertainya.

Tidak semua HP wajib mengikutsertakan .JAD setiap kali akan menginstall file aplikasi .JAR bahkan tanpa .JAD pun beberapa HP bisa otomatis terinstall dalam HP.
Lalu bagaimana bila suatu situs hanya menyediakan .JAR saja sedangkan HP kita termasuk yang wajib JAD? mungkin anda bisa mencoba tools gratis JADMaker yang dapat di download di sini:
http://www.ziddu.com/download/3787518/JADMaker.zip.html

Atau secara manual di:
http://wiki.forum.nokia.com/index.php/Generate_JAD_from_JAR_file

Bisa juga secara online di internet:
http://www.topixoft.com/j/

Universal Samsung Mobile Secret Code

*#06#
IMEI number (International Mobile Equipment Identity)

*#0000#
Firmware version

*#92702689#
Life Timer - The amount of time your phone has spent sending and receiving calls.

*#62209526#
Wireless (WiFi/WLAN) MAC Address (M A C _ W L A N)

*#2820#
Bluetooth MAC address (B T A 0?)

*#7370#
Format phone (R E S 0 ?)

*#7780#
Factory Reset (R S T 0 ?)

Note:
Format phone restores phone to as if it was out of the box. Retains firmware version and operator Variant changes but wipes all applications you have installed. Does not format the memory card so any apps on there may reinstall once powered back up again.

Another way to format some symbian phones: Power off phone. Press and hold Green, * and 3 and keep them held whilst powering on and for a few seconds after.

Factory Reset resets all settings to defaults but keeps any applications you have installed and photos etc. Both need the Security code, which, by default, is 12345.

(mobile-secretcodes.blogspot.com)

SGH-i550 atau SGH-i550W ?

Sebenarnya HP Samsung SGH-i550W adalah pengembangan dari SGH-i550 yang spesifikasinya dapat dilihat di sini:

http://id.samsungmobile.com/mobile/SGH-I550W/spec
http://www.mobile88.com/cellphone/Samsung/Samsung-SGH-i550w/specification.asp

Pada mulanya SGH-i550 adalah HP Smartphone pertama yang menyediakan aplikasi GPS berbasis Symbian (S60 3rd). Beberapa bulan kemudian muncul pengembangan SGH-i550W yang lebih komplit lagi mulai dari HSDPA hingga WiFi.

Oleh karena itu janganlah aneh bila SGH-i550W terdeteksi sebagai SGH-i550 oleh XP dan Vista.

Begitupun juga pemakai HP ini disarankan untuk tidak terlalu sering menambahkan huruf "W" dalam berbagai urusan setting. Seperti registrasi GPRS hingga 3G cukup saja dengan menggetikkan:

WAP Samsung SGH-i550
GPRS Samsung SGH-i550
3G Samsung SGH-i550

kode ini sama berlakunya untuk SGH-i550W, karena bila tetap saja menambahkan huruf "W" akan dianggap salah penulisan oleh provider cell.
Begitu pula anda tidak perlu khawatir sekalipun di situs www.getjar.com hanya diakui SGH-i550 tetapi tetap kompatibel dengan SGH-i550W, yang tidak kompatibel itu harga jualnya!

Bongkar HP Samsung

Mungkin gak ada salahnya bila kita iseng-iseng bongkar HP Samsung yang udah uzur daripada jadi ganjel jendela...

Kebetulan ada sebuah situs yang menyediakan service manual secara lengkap dari bermacam tipe HP Samsung (format PDF) yang mungkin bisa dicoba di:

http://samsungtuning.free.fr/index.php?lang=en

Contohnya untuk tipe SGH-i550 dan "W" dapat dibuka di sini:

http://samsungtuning.free.fr/service_manual/SGH-i550.pdf

Bila membutuhkan program flasher/downloader Apollo.exe download di sini:

http://www.ziddu.com/download/3818107/Apollo_v5.24.rar.html
http://www.ziddu.com/download/3818161/Apollov5.27.rar.html

Biasanya dibutuhkan pula Microsoft XML Parser (MSXML) yg bisa didownload di sini:

MSXML 4.0 SP3 (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7f6c0cb4-7a5e-4790-a7cf-9e139e6819c0)
atau
MSXML 6.0 SP1 (http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=d21c292c-368b-4ce1-9dab-3e9827b70604)

Untuk Samsung USB Phone Driver (20080925150838468_Samsung_USB_Driver_Installer.exe)

http://narod.ru/disk/3860092000/20080925150838468_Samsung_USB_Driver_Installer.exe.html
atau
http://www.samsung.com/id/support/download/supportDownMain.do

Untuk Samsung PDA USB Driver (SSDN_V1.1.808.7165_SETUP_whql.exe)

http://narod.ru/disk/3860111000/SSDN_V1.1.808.7165_SETUP_whql.exe.html
atau
http://www.samsung.com/id/support/download/supportDownMain.do

Untuk download PC Studio terbaru:
http://www.samsung.com/id/support/download/supportDownMain.do

Bila gak mau repot mutar-muter, bisa nyoba yg ini lengkap satu paket:

  • Phone drivers Samsung_PC_Studio_7_7.1.30.8.exe
  • PDA drivers SSDN_V1.1.808.7165_SETUP_whql.exe
  • Apollo v5.27.exe + unrar.dll
  • msxml.msi
  • Samsung S60 Phone ROM Image download Manual (English).doc

http://www.mediafire.com/download.php?ytgtyumkmnf

Untuk firmware update biasanya banyak berserakan di forum atau cari aja di google yang penting tahu arti dari kode firmware HP Samsung seperti (thanx to Donuts):

Destination firmware:
XX = Western Europe
XE = Eastern Europe
XA = Central Europe
ZC = Asia
ZJ = Asia
DC = Thai / English
AI = Italiana Brandizzo TIM
CD = Proximus
BU = Vodafone
AE = SFR
AU = Mobilkom
BM = Swisscom
BO = T-Mobile
NB = Tele2 Norway
CT = TDC
CV = Telenor
BF = Optimus
BB = TMN

Year firmware
H = 2008
G = 2007
F = 2006
E = 2005
D = 2004
W = 2003
V = 2002
U = 2001

Empat huruf selanjutnya adalah kode bulan:
A = January
B = February
C = March
D = April
dst

Sedangkan angka terakhir adalah kode versi rilis firmware. Contohnya "I560XXHC1" artinya:
i560 – Model HP Samsung
XX – Western Europe
H – 2008
C – bulan Maret
1 – Revision 1

Untuk mengetahui firmware bisa juga dengan secret code tertentu, misalnya untuk SGH-i550W dengan mengetikkan *#0000# atau *#1234# (untuk kode lainnya lihat di http://samsung-secret-codes.blogspot.com)

Salah satu contoh bagaimana instalasi ROM image HP Samsung berbasis symbian S60 (thanx to allal123):

How to download ROM Image for Samsung S60 Phones

PREPARATION
A. Apollo v5.25
B. USB driver for Apollo
  • PDA : SSDN_V1.1.808.7165_SETUP_whql.exe
  • PHONE : SAMSUNG Mobile USB DRIVER(4.40.7.0) v1.6.zip

C. unrar.dll for Apollo
D. MS xml parser : Msxml.msi
E. USB Cable
F. I8510 phone with almost fully charged battery(more than 3 battery bars)

CONCEPTS AND CAUTIONS

  1. Binary is devided for 2 images, PDA and Phone. PDA image consists of CODE and CSC.
  2. Do Not power off the phone or disconnect cable during download.
  3. Use right version of Apollo written in ‘Release Note’.
  4. Vesions of CODE, CSC and PHONE should be matched correctly according to ‘Release Note’ when you download. If the combination is wrong, phone may not work.
  5. Phone LCD will show the downloading progress bar when you download CODE and CSC, however it will not show the progress bar during PHONE download. Instead Apollo shows the progress.


USB DRIVER INSTALLATION

  1. Excute SSDN_V1.1.808.7165_SETUP_whql.exe to setup PDA driver.
  2. Unzip SAMSUNG Mobile USB DRIVER(4.40.7.0) v1.6.zip, setup PHONE driver with setup.exe.


HOW TO MAKE SURE DRIVER INSTALLATION

A. Launch Apollo.
B. How to make sure PDA Driver
  • Power on the phone with 1 + 4 button pressed.(PDA Download Mode)
  • When you connect phone to PC, you can see the message like the picture below. This means PDA Driver is installed well.
C. How to make sure PHONE Driver
  • Power off the phone and Power on with 7 + * key pressed.(MODEM DOWNLOAD Mode)
  • When you connect phone to PC, you can see the message like the picture below. This means PHONE Driver is installed well.


RELEASE
A. PHONE Release

  • Phone binary is release by Modem Team, the releationship between PDA and PHONE is written in ‘Release Note’. Therefore you should ***** ‘Release Note’ to know correct CODE and CSC version for PHONE.
  • In myProject, you can find the ‘Release Note’ at Baseband Binary.

B. PDA release consists of CODE and CSC.

  • FULL(CODE + CSC) Release
  1. CODE and several CSC are released concurrently, in myProject CODE and CSC will be zipped as one file. The zip file is uploaded in Phone Binary part.
  2. There exists PreSetTable.xml with some binary files in the zip file.
  • CODE Release
  1. After FULL Release, modified CODE is released without CSC modification.
  2. In myProject, it is uploaded at Phone Binary part. There are CODE binary and PreSetTable.xml in the zip file.
  • CSC Release
  1. Without modification for CODE, modified CSC is released.
  2. In myProject, it is uploaded at CSC Binary part, there are CSC binary and PreSetTable.xml in the zip file.


HOW TO DOWNLOAD
!!! Make sure CODE, CSC, PHONE mapping in ‘Release Note’, and then download with the correct version . After download, press *#1234# and ***** CODE, CSC and PHONE version . This is very important!!!

  • CODE + CSC + PHONE Download(FULL Release)
  1. In myProject, download FULL Release and PHONE binary.
  2. Launch Apollo, press button to select PHONE binary.
  3. Press button and select PreSetTable.xml.
  4. Choose Country at ‘Country:’ , choose Operator at ‘ Operator:’.
  5. Confirm CODE and CUSTOM version.
  6. Power on the phone with 4 + * key pressed(ALL DOWNLOAD Mode)
  7. When you connect phone to PC with USB, Modem is attached.
  8. In PDA Status, ***** all the settings below are fine(default settings)
  9. Select Model Name at ‘Model:’.
  10. Press to start all download.
  11. After PHONE is download first, the device will be re-booted automatically. And then CODE and CSC will be downloaded. If the phone is not re-booted automatically, detach the usb cable of the phone and power off. Power on with 1+4 key pressed, and the re-attach to PC. Then PDA binary will be downloaded automatically.


  • PHONE Download Only
  1. Proceed from the step’i-1.’ to ’i-3.’
  2. Turn on the device with 7 + * key pressed(Modem Download Mode)
  3. Do from ‘i.-7’ to ‘i.-9’.
  4. Press button to start download.
  • CODE + CSC Download Only
  1. Do ‘i.-1’ , ‘i-3’, ‘i-4’, ‘i-5’.
  2. Turn on the device with 1 + 4 key pressed and connect to PC to attach PDA part.
  3. Do ‘i.-8’.
  4. Press button to start PDA download.
  • CODE Download Only
  1. In myProject, Download CODE Release and unzip.
  2. Do ‘i.-3’~’i-5’.
  3. Power On the phone with 1 + 4 key pressed and connect to PC with USB to attach PDA part.
  4. At PDA Status, Select ‘CODE’. ***** options like this.
  5. Press button to start download.
  • CSC Download Only
  1. In myProject, download CSC Release and unzip.
  2. It is impossible to download only with CSC Release in case of some Releases(before 2008/09/11 version) . In this case, to download the binary find CODE binary first that is mapped the CSC you want to download, in myProject. Unzip CODE, and overwrite the CSC and then Do things below.
  3. Do ‘i.3~5’.
  4. Power on the phone with 1 + 4 key pressed. Connect the device to PC then PDA is attached.
  5. Select CSC at PDA Status. Un***** ‘Bootloader’ option.
  6. Press to start download.


TROUBLESHOOTING
A. If the device is not attached after the Driver installation,

  • Change USB Cable and Phone.
  • Try with another PC.
  • Consult R&D Team.

B. Download stops in the middle

  • Close and launch Apollo again then try again.
  • ***** the phone is charged enough.

C. Download doesn’t start

  • ***** the connection between Apollo and a phone.
  • Select an image again.
  • ***** the image is not damaged.
  • ***** Apollo version matches with the image.

D. Phone doesn’t boot up after downloading

  • ***** CODE, CSC and PHONE Version


good luck...